Fusion PCB/PCBA Order Submission Guidelines

All the process in One Page. Ordering PCB has never been so easy!

Check it out!
When you are ready to order, navigate to Fusion>Fusion PCB

                                     Order Guideline



1.Upload Gerber file
2.Choose the parameters
3.Upload BOM if you need a PCBA order
4.Add to cart


5.checkout

6.Fill in the address and choose a shipping method
7.
Finished the payment



Tips:

  • 1.Gerber file must be the RS-274x format.  Drill file(pcb name.TXT) must be Excellon format.
  • Gerber file requirement:
  • Top Layer: pcbname.GTL
  • Top Solder Mask: pcbname.GTS
  • Top Silkscreen: pcbname.GTO

  • Bottom Layer: pcbname.GBL
  • Bottom Solder Mask: pcbname.GBS
  • Bottom silkscreen: pcbname.GBO
  • Board Outline:pcbname.GML/GKO
  • Drills: pcbname.TXT
  • Inner Layer: pcbname.GL2(for 4 layer)
  • Inner Layer: pcbname.GL3(for 4 layer)


2.BOM content template



  • 3. Design rules
  • Eagle
  • If you use Eagle CAD, you can download DRU file to verify your design before order.
  • 1.Download the DRU file
  • DRU for 2-layer board 
DRU for 4-layer board 
2.
Open the DRC in the Eagle EDA

3.Load the DRU file in DRC

4.check the error of your design



You can generate your Gerber file through the following link:
Seeed Gerber Generater 2-layer board
Seeed Gerber Generater 4 layer board

Altium
Altium Designer Gerber Generator



PCB specification 
PCBA specification





Feedback and Knowledge Base