Fusion technical support

  1. What is Gerber file?
  2. What are the PCB panelization rules?
  3. How to generate Gerber file
  4. How to export the drill files correctly?
  5. What is the correct way to draw the silkscreen on the bottom side?
  6. If my PCB does not require Solder Mask, what should I do?
  7. If my PCB do not require Drilling Holes, what should i do ?
  8. Which layer should I use in EAGLE for milling?
  9. What is the depth of the v- cut?
  10. If my PCB's do not have the silkscreen, how can I proceed with my PCBA order?
  11. How to export the correct drilling layer from eagle
  12. What are the dimensions for Dielectric Separation thickness?
  13. What is the inner layer copper thickness?
  14. What is Blind/Buried Via?
  15. What is the The Min Track/Spacing for 1oz./2oz./3oz. Copper weight
  16. What is Half-cut/Castellated Holes.
  17. How can i do if i do not required to make plated through holes?
  18. The dimension for PCB
  19. The material for FR-4/Aluminum Board/FPC
  20. What is the thickness of Fusion PCB?
  21. The surface finish for PCB
  22. The color of solder mask
  23. The copper weight for PCB
  24. What is Impedance Control?
  25. PCB quantity
  26. How to generate Gerber files from PCBE
  27. How to generate Gerber files from Eagle
  28. How to generate Gerber files in Altium Designer
  29. How to generate Gerber files from CircuitMaker
  30. How to generate Gerber files from KiCAD
  31. How to generate Gerber files from DipTrace
  32. How to generate Gerber files from Proteus
  33. How to generate Gerber files from DesignSpark
  34. How to convert drilling layer from Gerber to Excellon format in CAM350
  35. Recommend size for BGA
  36. Solder Mask Dam
  37. What is the difference between Fusion standard PCB and Fusion Advanced PCB?
  38. What should i do when my Gerber files over too big (over 4MB)?

Feedback and Knowledge Base

(thinking…)