My Seeed Idea
Share. Vote. Discuss. See.
Share your ideas, tell us what you think of other people’s ideas and join the discussion.
Idea Guidelines:
1 – Idea needs to be something we can do. This means, although we appreciate general feedback (for example, “this is good!” or “this hurts!”), here we are looking for ideas we can work on.
2 – Specific. The more details you can provide, the better. Heck—you can attach files to ideas or a reference link to show us what you want!
To get help or support, download, or more information, please visit our wiki site.
554 results found
-
Fix you Stalker V3 Defect
fix your P5 defect on the Stalker V3
1 vote -
More Cameras
More inexpensive-yet-good camera modules composed of OVM cameras with flex cables.
1 vote -
Adding LiPo battery support to BeagleBone Green
I suggest adding support for LiPo batteries to the BeagleBone Green.
As far as I can see in this post (http://www.element14.com/community/community/designcenter/single-board-computers/next-gen_beaglebone//blog/2013/08/10/bbb--rechargeable-on-board-battery-system) is just a matter of adding a LiPo battery connector and a resistor
1 vote -
Add a DTR Pin to the dual mode Bluetooth Device so that it can also flash the microcontroller over the air.
Currently the Bluetooth Modules with HM-13 are not providing the DTR Pin that is needed to reset the microcontroller while flashing a new firmware. It would be great if that functionality could be made available on one of the programmable Output Pins.
1 vote -
2.8" TFT-Touch display uses flip and rotate coordinates and callback functions for touch
I'd like to draw your attention to the library extensions I wrote for the 2.8" TFT-Touch display with resistive touchscreen.
Please visit:
http://86.91.251.42/JanBeeProjects/TFT_Touch2p8inch/TFT_Touch2p8.htmThese extensions to the TFTv2 library allow flipping and rotating the coordinate system and implement a simple to use system for bookkeeping of touch-sensitive areas, using call-back functions.
You may publish these files and the demo projects as you like.
Greetings, Jan Breemer, jan@breem.nl
1 vote -
1 vote
-
Free talk at FSOSS "fRephone" http://fsoss.senecac.on.ca/2015/schedule
I could talk about Rephone at Seneca in Toronto next week. Ask dumb questions and become undumbina-ted
1 vote -
sell thermoplastic extruders like the WEE KIT from FILABOT.COM for recycling prints from 3D Printers
with the proliferation of thermoplastics like water bottles and "prints" from 3D Printers, why not sell a kit that would allow individuals, schools, and companies that have lots of waste prints to make their own filament material like the KIT EXTRUDER from http://www.filabot.com ?
1 vote -
Fix your site
fix your site so that you are giving the correct tracking numbers, not fake or tracking number for a previous shipment. I recently purchased a product in october. status is tracable but tracking number is for a shipment in august?!?!? how is this even possible?
1 vote -
e-ink or oled starter kit
arduino to make mimi bt display unit and connect to mobile
1 vote -
wonder if seeed has anything that could send an sms when the diaper is wet ;)
wonder if seeed has anything that could send an sms when the diaper is wet ;)
1 vote -
Mentor Gerber Format
Complete procedure to get the PCB, Mentor Graphics is the software
1 vote -
Motor Driver Board V1.0
This board needs to be redesigned as it cuts out the RPi when the motors activate. There does not seem to be a solution
1 vote -
Gerber drill generator needs updating
The CAM job needs to be updated for eagle 7.0+ to use Excellon_24 instead. Otherwise, the dimensions of the drill file doesn't work.
1 vote -
Please revise your search form, why do I have to put in the date, give me default. I'm searching "labview" in your store and found nothing!
Please revise your search form, why do I have to put in the date, give me default. I'm searching "labview" in your store and found nothing!
1 vote -
Fraud?
I suggest you fix your ordering system!
1) I ordered and paid $398,20 USD.
2) You prepared to ship something for $110.58, so I complained that something is missing.
3) You cancelled my order claiming I did not pay (so your accountant says) and suggested to re-order
4) I sent you my paypal transaction of $398,20 USD and your invoice of 110.58 EUR.
5) and I am waiting for a replyObviously I am not willing to reorder and pay twice.
Regards,
Robert
--
Robert Berger
Embedded Software SpecialistReliable Embedded Systems
Consulting Training Engineering
URL: http://www.reliableembeddedsystems.comsubscribe to Linux…
1 vote -
Seeeday
to NOT do a Seeeday again, because
- the interesting things were gone after half the time AND
- my coupon was flagged as "Expired" which clearly it was not.The idea to do a Seeeday is surely to make friends by offering nice prices and discount, but this way you make people wonder ...
1 vote -
Foiled by Firefox
I went to order the quadcopter at 8.45 PST $188 special only to discover the add to cart doesn't work in IE. By the time I downloaded Firefox It was 8:58 PM PST. By the time I logged into PayPal, the sale was over. Thanks seedystudio.
1 vote -
Out of Stock but on Sale! and no option to backorder!
I have been trying to purchase GrovePi+ &Grove Smart Plant Care Kit for Arduino for months (out of stock); at least one was on sale SEEEDay2105! That was frustrating. I voted for the out of stock below. Will either be available?
1 vote -
Premium pcb calculator
Improve pcb calculator for 6-8 layers board
1 vote
- Don't see your idea?