My Seeed Idea

Share. Vote. Discuss. See.

Share your ideas, tell us what you think of other people’s ideas and join the discussion.
Idea Guidelines:
1 – Idea needs to be something we can do. This means, although we appreciate general feedback (for example, “this is good!” or “this hurts!”), here we are looking for ideas we can work on.
2 – Specific. The more details you can provide, the better. Heck—you can attach files to ideas or a reference link to show us what you want!

To get help or support, download, or more information, please visit our wiki site.

I suggest Seeed...

You've used all your votes and won't be able to post a new idea, but you can still search and comment on existing ideas.

There are two ways to get more votes:

  • When an admin closes an idea you've voted on, you'll get your votes back from that idea.
  • You can remove your votes from an open idea you support.
  • To see ideas you have already voted on, select the "My feedback" filter and select "My open ideas".
(thinking…)

Enter your idea and we'll search to see if someone has already suggested it.

If a similar idea already exists, you can support and comment on it.

If it doesn't exist, you can post your idea so others can support it.

Enter your idea and we'll search to see if someone has already suggested it.

  • Hot ideas
  • Top ideas
  • New ideas
  • My feedback
  1. replace generic icon with pcb render

    on the account order history page pcb orders should have a rendering of the board instead of that generic icon

    11 votes
    Vote
    Sign in
    Check!
    (thinking…)
    Reset
    or sign in with
    • facebook
    • google
      Password icon
      Signed in as (Sign out)
      You have left! (?) (thinking…)
    • To make the gerber viewer available for past orders

      When viewing the order history it is possible to reorder past orders. It would help a lot if it was possible to view PCB's in these orders - it would at least increase the likely hood that one actually does reorder something.

      57 votes
      Vote
      Sign in
      Check!
      (thinking…)
      Reset
      or sign in with
      • facebook
      • google
        Password icon
        Signed in as (Sign out)
        You have left! (?) (thinking…)
      • Output job file

        Create output job file for use in project to generate required files in format you need. File will specify BOM format, gerber options, etc.

        7 votes
        Vote
        Sign in
        Check!
        (thinking…)
        Reset
        or sign in with
        • facebook
        • google
          Password icon
          Signed in as (Sign out)
          You have left! (?) (thinking…)
        • Create waterproof Grove connectors

          If Grove (4 pin) connectors could be waterproof, that would make it easier to use outdoors/in harsh environments.

          Wouldn't have to be IP67 or IP68 compliant, just something a bit more robust that what exists.

          You'd need bulkhead connectors as well, so you could put a controller/batteries in a waterproof box, and the sensors someplace else.

          4 votes
          Vote
          Sign in
          Check!
          (thinking…)
          Reset
          or sign in with
          • facebook
          • google
            Password icon
            Signed in as (Sign out)
            You have left! (?) (thinking…)
            1 comment  ·  I suggest  ·  Admin →
            Under Consideration  ·  USB responded

            Hi Andrew:
            Thanks for your advice, we believe that waterproof function is important in harsh environments for groves. But since the sensor itself needs to be waterproof, we believe that an enclosure for the whole grove module may be better.
            Please let us know your opinion.

          • Few more details for 3D printing

            The 3D printing should show the output design diameters for confirmation after uploading the STL file. Now there is an 3D image of the design and volume being calculated. I would like to see the volume units and general diameters for confirmation of my design. If I saw that my print dimensions match the ones on the site it would be very helpful. I would imagine that this would make things very clear and lower the ordering threshold from customers also.

            1 vote
            Vote
            Sign in
            Check!
            (thinking…)
            Reset
            or sign in with
            • facebook
            • google
              Password icon
              Signed in as (Sign out)
              You have left! (?) (thinking…)
              1 comment  ·  I suggest  ·  Admin →
            • Optional 3.3V jumper for MCP2515 on CAN-BUS Shield

              Just hate ruining a nicely designed and brand new board like this to use 3.3V on the MCP2515. I can understand the design as the Uno is based on 5V logic and is also a requirement for the MCP2551 but for added compatibility it would be nice to see in future revisions.

              1 vote
              Vote
              Sign in
              Check!
              (thinking…)
              Reset
              or sign in with
              • facebook
              • google
                Password icon
                Signed in as (Sign out)
                You have left! (?) (thinking…)
              • Bitcoin payments

                bitcoin is easier and cheaper than shitty credit cards. Adafruit.com and many chinese PCB manufactureres already accept it.

                41 votes
                Vote
                Sign in
                Check!
                (thinking…)
                Reset
                or sign in with
                • facebook
                • google
                  Password icon
                  Signed in as (Sign out)
                  You have left! (?) (thinking…)
                • Don't see your idea?

                My Seeed Idea

                Feedback and Knowledge Base