Put an information sheet into arduino shield products sold at Radio Shack.
You need to put instructions into the boxes of products that go to Radios Shack. I spent over 2 frustrating hours combing both sites for information. And still I do not know the pins that I need to toggle to turn on relays from my "Seeed Studio Relay Shield." Is it too much to ask for a pinout and sample code? Or at the very least a LINK TO A WEB PAGE WITH THAT INFORMATION??????
![](http://www.gravatar.com/avatar/d13cb0791f90c3523a96cb4074f1385d?size=40&default=https%3A%2F%2Fassets.uvcdn.com%2Fpkg%2Fadmin%2Ficons%2Fuser_70-6bcf9e08938533adb9bac95c3e487cb2a6d4a32f890ca6fdc82e3072e0ea0368.png)
-
Bryce Nesbitt commented
Could just print this on the box (the URL if nothing else)
-
AdminUSB (Admin, Seeed Studio) commented
Hi Thomas :
We are deeply sorry for this.The reference info will listed in our wiki page.
You can find the informations in:
http://www.seeedstudio.com/wiki/Relay_Shield_V2.0#Shield_Interface_Description
Sorry for wasting your time again.