Skip to content

How to connect UARTSBeeV4 to ESP8266 based WiFi module (SKU:317060015).

← Seeed Products' FAQ

UartSBee_V4 ESP8266 based WiFi module - SPI supported

  • VCC(3.3V)-> VCC
  • TX-> RXD
  • RX->TXD
  • GND-> GND
Make CH_PD to Active High in order to enable Wifi module and refer the brief spec Note : Set the power selection switch to 3.3V on UartSbee_V4

Feedback and Knowledge Base

(thinking…)