My Seeed Idea
Share. Vote. Discuss. See.
Share your ideas, tell us what you think of other people’s ideas and join the discussion.
Idea Guidelines:
1 – Idea needs to be something we can do. This means, although we appreciate general feedback (for example, “this is good!” or “this hurts!”), here we are looking for ideas we can work on.
2 – Specific. The more details you can provide, the better. Heck—you can attach files to ideas or a reference link to show us what you want!
To get help or support, download, or more information, please visit our wiki site.
147 results found
-
create a vacuum / pressure sensor from 30" Hg to 3 atm.
A vacuum and pressure sensor that is Arduino compatible that can measure from 30" mercury vacuum to approximately 3 atmospheres pressure. It'd be great for those of us using Arduino as engine ECUs to be able to have fine-grained control of engine parameters by knowing intake vacuum or pressure. Knowing the intake cross-sectional volume, the intake vacuum or pressure (in the case of blown engines) could also be used as an intake air flow sensor, which will really be beneficial to those of us using heated water injection to create extra cylinder pressure via steam expansion (to measure if we're…
3 votesHi DB:
We think this is a very professional area for the industrial control, would you please give us more advise about the popular sensors in this area, so we can make our products more convenient for you to use. -
GSM for Pebble
Can we connect the GSM module to Pebble? because I want to leave my phone :), I wait for your comments.
3 votes -
Fix the responsive layout on windows
you could tweak your responsive breakpoints.
It's great that the site scales and works on mobile :D
But on windows, the layout hasn't taken into account the fact that scrollbars take up some of the reported available screen width.
With my 1200px wide monitor, this causes an unneccessary horizontal scrollbar.
3 votesHi Stian, thanks for your helpful information. We’ve started fixing it.
Thanks again and have a great day. -
Wireless charging for Super Capacitor
A wireless charger that can charge a Super Capacitor [SC]. It would have an adjustable maximum voltage of 2.0 to 2.5 volts, and be able to dump large amounts of current [5A or more -- much more] into an extremely low impedance load [i.e. a current source with an upper voltage limit]. Also, it should be able to dump current into the SC at full bore all the way up to the maximum voltage. A typical SC has a maximum voltage of 2.7 volts, but should not be charged higher than around 2.2 to 2.5 volts [the higher the voltage…
3 votes -
Accurate shipping price evaluation (include import taxes for UPS/DHL/...)
I bought 10 PCB for 4€38 - 1€32 discount. (round to 4$).
I payed 21€38 shippement (round to 25$) using UPS.
So far so good, this was calculated and announced.
BUT I had to pay additional 20€ to UPS (round to 25$) (about 5€ VAT + 15€ fees for UPS ! )This fees are precisely calculated and could be known in advance, please include them (even just estimation) in cart page.
Simple first step could be to put a simple warning.PS: I do not even know how seeed earn money with such low prices
3 votes -
change settings of an order
on order nummer 170406231014 can i change the dimension in 100mm?*70mm?
and Layer into 1 and PCB color in blue ?
I have doing to wrong by doing first the setting and then upload the file.regards ronald
3 votes -
add re order tap to PCB order history (ie as it was).
add re order tap to PCB order history (ie as it was).
2 votes -
Beaglebone Industrial
It would be nice to have an option where Industrial range components are used on the beaglebone green.
Quickly looking at the BOM, there are four components, all have -40 to +85C equivalents so a relatively simple change.2 votes -
CAN on LinkIt Smart 7688
Like Mbed NXP 1768 can you implement CAN on your LinkIt Smart 7688 ? your micro is faster and it can be useful to make a CAN/LIN/WiFi gateway. Thank you
2 votes -
Industrial 4-20ma input and output GROVE modules
I wish to control and read Industrial Sensors and equipment using 4-20mA signals, using a neat Grove module.
Thanks.
2 votesDo you mean by “industrial sensors with Grove port”?
-
Add order status in the order information.
Add the order status in the order detail information.
2 votes -
Need more Sensors to use in my smart home projects
I am building a smart home project in my grandma's house, and the fall detection really works well, can I know if you guys will have more sensors that I can adopt in my current projects? Thanks.
2 votes -
would keep discounted EU postage
It really isn't fair for customers who order 10 boards to receive a discount, where customers who order more do not. This discount is more fairly distributed among all customers if it comes in the form of cheaper postage costs.
2 votes -
The grove serial mp3's sound is vastly superior than the grove mp3 v2.0 especially where volume control is concerned
I wish that either you do not retire the grove serial mp3 or try an other mp3 chip for a grove mp3 v3.0. thanks
2 votes -
Make an HC11/12 development kit available.
433MHz comms are used by many devices and the 433MHz chip on the HC12 has a lot of capabilities. If an IDE were available then the HC12 board could be adapted by developers for purposes beyond the standard FU1/2/3 usage.
2 votes -
CISECO SRF Module (used on
I would like to by about 20 pc. of the CISECO SRF Module (used on CISECO SRF Shield). Will it get available again ?
2 votes -
No registration is posible, pease analize why I can not register.
No register is possible. System Registration is working bad.
2 votes -
WS2812B breakout board does not say how many are in the package
http://www.seeedstudio.com/depot/WS2812B-LED-Breakout-Board-p-2010.html
I can't figure out how many I'm going to get, because it doesn't say. The picture shows five, but one commenter received only one. Please add a number to the description saying how many WS2812B breakout boards I will receive if I order one unit.
2 votes -
Gerber Viewer Improvements
Enable the recognition and online viewing of inner layers on the Gerber Viewer.
2 votes -
Raspberry PI USB touchscreen display
I have a Raspberry Pi application which provides a touch-screen
interface to do home automation.I want a small USB display that can be mounted flush to the wall in a
2-gang switch box with a good looking cover plate.I see the "2.8 Inch USB TFT Display Module For Raspberry Pi" by RoboPeak, but the USB connector is on the side.
It would be great if the USB connector faced backward into the switch box and it had a mounting bracket and cover plate for a 2-gang box.
2 votes
- Don't see your idea?