Hello Support Team,
I got a tick tock shield for my daughter, but now I realize we are missing some parts (see below), I would like to add them from german retailers, can you provide me with the specifications?
Thanks, best regards, Andreas
Thermistor RT1 1
Light dependent resistor LDR1
the capacitors are described well enough in the soldering guide1 vote
better documents on how o finish the project you ordered. complete documentation .0 votes
Sometimes i can see something i like to buy. But don't want it now. It is for whishlist is right?
So why I cannot add there items which are temporarly out of stock?10 votes
Hi, You guys should take a look at the Fusion PCB checkout success page. It looks like you might have left some debug print strings that di
You guys should take a look at the Fusion PCB checkout success page. It looks like you might have left some debug print strings that display the SQL for pulling the order data back. If this is on other pages it could pose a security risk. See attached file for example.2 votes
bought two new sensors and no support for GrovePi and RaspberryPi - Voltage Divider POW0516P & Temp/Humidity 101020074 need python software
Need Python test software for two new sensors, am using GrovePi and RaspberryPi. Iam sure others would like this software both very useful sensors. please update software for new sensors
Voltage Divider POW0516
Temp/Humidity 1010200741 vote
Thanks for your good suggestion. We’re doing.
The new user registration page is clearing the Address's State if there is an error. In my case it was the nickname. Then you get an error for that. It also forgets that you entered a captcha. You should only have to do that successfully once as you have proved you are human. There is also no indication that a Nickname needs to be unique. I would rename that Username, which is thus implied. It is also useful to use AJAX to immediately let the user know that a Username is taken, rather than waiting them to press Submit and get an error. It would also be nice if there was an indication whether the address being entered would be used for billing or shipping, although since I have not yet gone through the purchase process, it may not be an issue.
The new user registration page is clearing the Address's State if there is an error. In my case it was the nickname. Then you get an error for that. It also forgets that you entered a captcha. You should only have to do that successfully once as you have proved you are human. There is also no indication that a Nickname needs to be unique. I would rename that Username, which is thus implied. It is also useful to use AJAX to immediately let the user know that a Username is taken, rather than waiting them to press Submit and…1 vote
Support DipTrace6 votes
We will ask Diptrace to import OPL.
Thank you for your feedback.
more components in Open Parts Library, 555, zeners, comparators, power FETs, voltage references, voltage regulators (78XXX)16 votes
Add 433/868Mhz module to communicate with wireless sensors which work on this frequences.8 votes
I would like to have instructions how to convert my KiCad project the way it can be assembled with your service.117 votes
stuff that works....0 votes
Could you show us what is “old stuff” ?
Dial Up modem's days are long gone but Land line still exists either in the form of home pbx or PSTN, An Arduino based Dial Up modem shield can be used for a lot of fun projects.
Modem chips are already available with AT Command support
Currently there is no shield to interface arduino with phone line
This shield can also become a base for Arduino corded telephony with additional sheilds for setting up arduino based Home PABX e.g 4 port intercom shield or Voip shield12 votes
That’s a gooood idea, we’re going to start it from forum.
DSO Quad whole firmware newest source code release, it seems the source code in seeed studio wiki is outdated.
Make a latest full rom source code bundle is appreciated, e.g DFU,LOGO,SYS,APP1 vote
All information have been post here:http://www.seeedstudio.com/wiki/DSO_Quad:Upgrading_Firmware#Hardware_V2.72
A complete Edison+Arduino+Starter Kit in one bundled SKU.0 votes
We have kit for Edison(http://www.seeedstudio.com/depot/Grove-starter-kit-plus-Intel-IoT-Edition-for-Intel-Galileo-Gen-2-and-Edison-p-1978.html?cPath=84_13), maybe other requirements?
Page 5 of http://www.seeedstudio.com/document/pdf/Introduction%20to%20Grove.pdf has duplicate information - typo1 vote
for discount internationals3 votes
I would rather design a PCB knowing which parts you will support and incorporate those parts into my design instead of finding out the parts you support after I design a PCB and submit my Gerbers.8 votes
I wish seeedstudio would make a deal with the manufacturers of the Firefly RK-3288 and some other awesome products they are working on. Perhaps this isn't possible, but they do have some really neat things they are doing.0 votes
Thanks for your advice, we will pay close attention to Firefly RK-3288.But we don’t know the “neat things” they are doing, it will help if you can give us some info about this.
Please include a .pdf version of the Eagle Schematic files for people who don't own Eagle Licences, it would be very helpful. Thanks!
In particular I'm looking for the schematic for seeed arch gprs v212 votes
If Grove (4 pin) connectors could be waterproof, that would make it easier to use outdoors/in harsh environments.
Wouldn't have to be IP67 or IP68 compliant, just something a bit more robust that what exists.
You'd need bulkhead connectors as well, so you could put a controller/batteries in a waterproof box, and the sensors someplace else.4 votes
Thanks for your advice, we believe that waterproof function is important in harsh environments for groves. But since the sensor itself needs to be waterproof, we believe that an enclosure for the whole grove module may be better.
Please let us know your opinion.
- Don't see your idea?