I have a DSO Nano Oscilloscope v2, and I would like to connect a normal digital probe to this, but it has 3.5mm jack input. Are there any probe with this specs?
I have the original probes with hook and pins, but I would like to know if is there possible.1 vote
It would be fairly easy to connect grove sensors to an EV3 - you would just have to make a custom cable (pretty simple) and add some drivers (I can help there if you want)1 vote
my suggestion is for us to parter to create an electronic device to sign in and sign out with biometric
in my country nigeria,most workers get to their placer of work and go through a manual process of signing in,the time they resumed work,my idea is to see how this process can be atomated with a simple electronic device that would have a biometric system in it.where you use your thumb print to sign in.please get back to me so that i can explain better.there is a large market in nigeria for this busines.0 votes
Open Parts List should contain components with wide temperature range if possible.
Minus 30 degrees Celsius is needed some times and if not too much more expensive it can be a good idea to select the wide range.4 votes
Show all the steps using some example design right through to ordering
and show the result.8 votes
PCB dimension 25x35cm should be available for standart Fusion service. Pcb area is smaller than for 30x30.6 votes
More documentation9 votes
It will be very simple to pay from Russia!4 votes
Hello Support Team,
I got a tick tock shield for my daughter, but now I realize we are missing some parts (see below), I would like to add them from german retailers, can you provide me with the specifications?
Thanks, best regards, Andreas
Thermistor RT1 1
Light dependent resistor LDR1
the capacitors are described well enough in the soldering guide1 vote
better documents on how o finish the project you ordered. complete documentation .0 votes
Sometimes i can see something i like to buy. But don't want it now. It is for whishlist is right?
So why I cannot add there items which are temporarly out of stock?10 votes
Hi, You guys should take a look at the Fusion PCB checkout success page. It looks like you might have left some debug print strings that di
You guys should take a look at the Fusion PCB checkout success page. It looks like you might have left some debug print strings that display the SQL for pulling the order data back. If this is on other pages it could pose a security risk. See attached file for example.2 votes
bought two new sensors and no support for GrovePi and RaspberryPi - Voltage Divider POW0516P & Temp/Humidity 101020074 need python software
Need Python test software for two new sensors, am using GrovePi and RaspberryPi. Iam sure others would like this software both very useful sensors. please update software for new sensors
Voltage Divider POW0516
Temp/Humidity 1010200741 vote
Thanks for your good suggestion. We’re doing.
The new user registration page is clearing the Address's State if there is an error. In my case it was the nickname. Then you get an error for that. It also forgets that you entered a captcha. You should only have to do that successfully once as you have proved you are human. There is also no indication that a Nickname needs to be unique. I would rename that Username, which is thus implied. It is also useful to use AJAX to immediately let the user know that a Username is taken, rather than waiting them to press Submit and get an error. It would also be nice if there was an indication whether the address being entered would be used for billing or shipping, although since I have not yet gone through the purchase process, it may not be an issue.
The new user registration page is clearing the Address's State if there is an error. In my case it was the nickname. Then you get an error for that. It also forgets that you entered a captcha. You should only have to do that successfully once as you have proved you are human. There is also no indication that a Nickname needs to be unique. I would rename that Username, which is thus implied. It is also useful to use AJAX to immediately let the user know that a Username is taken, rather than waiting them to press Submit and…1 vote
Support DipTrace6 votes
We will ask Diptrace to import OPL.
Thank you for your feedback.
more components in Open Parts Library, 555, zeners, comparators, power FETs, voltage references, voltage regulators (78XXX)16 votes
Add 433/868Mhz module to communicate with wireless sensors which work on this frequences.8 votes
I would like to have instructions how to convert my KiCad project the way it can be assembled with your service.115 votes
stuff that works....0 votes
Could you show us what is “old stuff” ?
- Don't see your idea?