My Seeed Idea

Share. Vote. Discuss. See.

Share your ideas, tell us what you think of other people’s ideas and join the discussion.
Idea Guidelines:
1 – Idea needs to be something we can do. This means, although we appreciate general feedback (for example, “this is good!” or “this hurts!”), here we are looking for ideas we can work on.
2 – Specific. The more details you can provide, the better. Heck—you can attach files to ideas or a reference link to show us what you want!

To get help or support, download, or more information, please visit our wiki site.

I suggest Seeed...

You've used all your votes and won't be able to post a new idea, but you can still search and comment on existing ideas.

There are two ways to get more votes:

  • When an admin closes an idea you've voted on, you'll get your votes back from that idea.
  • You can remove your votes from an open idea you support.
  • To see ideas you have already voted on, select the "My feedback" filter and select "My open ideas".
(thinking…)

Enter your idea and we'll search to see if someone has already suggested it.

If a similar idea already exists, you can support and comment on it.

If it doesn't exist, you can post your idea so others can support it.

Enter your idea and we'll search to see if someone has already suggested it.

  • Hot ideas
  • Top ideas
  • New ideas
  • My feedback
  1. Pay direct via QIWI or Yandex money.

    It will be very simple to pay from Russia!

    4 votes
    Vote
    Sign in
    Check!
    (thinking…)
    Reset
    or sign in with
    • facebook
    • google
      Password icon
      Signed in as (Sign out)
      You have left! (?) (thinking…)
      0 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
    • support question

      Hello Support Team,

      I got a tick tock shield for my daughter, but now I realize we are missing some parts (see below), I would like to add them from german retailers, can you provide me with the specifications?

      Thanks, best regards, Andreas
      au@ulmers.com

      -----
      Thermistor RT1 1
      Light dependent resistor LDR1
      Crystal X1

      the capacitors are described well enough in the soldering guide

      1 vote
      Vote
      Sign in
      Check!
      (thinking…)
      Reset
      or sign in with
      • facebook
      • google
        Password icon
        Signed in as (Sign out)
        You have left! (?) (thinking…)
        0 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
      • documentatition

        better documents on how o finish the project you ordered. complete documentation .

        0 votes
        Vote
        Sign in
        Check!
        (thinking…)
        Reset
        or sign in with
        • facebook
        • google
          Password icon
          Signed in as (Sign out)
          You have left! (?) (thinking…)
          0 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
        • bought two new sensors and no support for GrovePi and RaspberryPi - Voltage Divider POW0516P & Temp/Humidity 101020074 need python software

          Need Python test software for two new sensors, am using GrovePi and RaspberryPi. Iam sure others would like this software both very useful sensors. please update software for new sensors
          Voltage Divider POW0516
          Temp/Humidity 101020074

          1 vote
          Vote
          Sign in
          Check!
          (thinking…)
          Reset
          or sign in with
          • facebook
          • google
            Password icon
            Signed in as (Sign out)
            You have left! (?) (thinking…)
            0 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
          • more components in Open Parts Library

            more components in Open Parts Library, 555, zeners, comparators, power FETs, voltage references, voltage regulators (78XXX)

            16 votes
            Vote
            Sign in
            Check!
            (thinking…)
            Reset
            or sign in with
            • facebook
            • google
              Password icon
              Signed in as (Sign out)
              You have left! (?) (thinking…)
              Needs More Details  ·  6 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
            • Support KiCad

              I would like to have instructions how to convert my KiCad project the way it can be assembled with your service.

              115 votes
              Vote
              Sign in
              Check!
              (thinking…)
              Reset
              or sign in with
              • facebook
              • google
                Password icon
                Signed in as (Sign out)
                You have left! (?) (thinking…)
                9 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
              • DSO Quad Source code Bundle

                DSO Quad whole firmware newest source code release, it seems the source code in seeed studio wiki is outdated.
                Make a latest full rom source code bundle is appreciated, e.g DFU,LOGO,SYS,APP

                1 vote
                Vote
                Sign in
                Check!
                (thinking…)
                Reset
                or sign in with
                • facebook
                • google
                  Password icon
                  Signed in as (Sign out)
                  You have left! (?) (thinking…)
                  1 comment  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
                • 3 votes
                  Vote
                  Sign in
                  Check!
                  (thinking…)
                  Reset
                  or sign in with
                  • facebook
                  • google
                    Password icon
                    Signed in as (Sign out)
                    You have left! (?) (thinking…)
                    2 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
                  • Firefly

                    I wish seeedstudio would make a deal with the manufacturers of the Firefly RK-3288 and some other awesome products they are working on. Perhaps this isn't possible, but they do have some really neat things they are doing.

                    0 votes
                    Vote
                    Sign in
                    Check!
                    (thinking…)
                    Reset
                    or sign in with
                    • facebook
                    • google
                      Password icon
                      Signed in as (Sign out)
                      You have left! (?) (thinking…)
                      1 comment  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
                      Needs More Details  ·  USB responded

                      Hi Aaron:
                      Thanks for your advice, we will pay close attention to Firefly RK-3288.But we don’t know the “neat things” they are doing, it will help if you can give us some info about this.

                    • Tutorials

                      Tutorials for how to use your shields would be great. Especially configuring other devices that run off of them. Like an X-Bee for example

                      0 votes
                      Vote
                      Sign in
                      Check!
                      (thinking…)
                      Reset
                      or sign in with
                      • facebook
                      • google
                        Password icon
                        Signed in as (Sign out)
                        You have left! (?) (thinking…)
                        1 comment  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
                      • create a vacuum / pressure sensor from 30" Hg to 3 atm.

                        A vacuum and pressure sensor that is Arduino compatible that can measure from 30" mercury vacuum to approximately 3 atmospheres pressure. It'd be great for those of us using Arduino as engine ECUs to be able to have fine-grained control of engine parameters by knowing intake vacuum or pressure. Knowing the intake cross-sectional volume, the intake vacuum or pressure (in the case of blown engines) could also be used as an intake air flow sensor, which will really be beneficial to those of us using heated water injection to create extra cylinder pressure via steam expansion (to measure if we're…

                        3 votes
                        Vote
                        Sign in
                        Check!
                        (thinking…)
                        Reset
                        or sign in with
                        • facebook
                        • google
                          Password icon
                          Signed in as (Sign out)
                          You have left! (?) (thinking…)
                          1 comment  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
                          Needs More Details  ·  USB responded

                          Hi DB:
                          We think this is a very professional area for the industrial control, would you please give us more advise about the popular sensors in this area, so we can make our products more convenient for you to use.

                        • Screw Shield Board for Industrial DIN Rail Enclosures

                          Seeeduino and Linkit can replace and disrupt industrial PLCs industry. Your boards only need a Screw Shield with 5.08mm pitch screws and a screw shield PCB so it can fit in traditional Bud Industries industrial enclosures (those enclosures are very inexpensive).

                          So the screw shield should meet Arduino connector specs and also needs the PCB to be sized such way that fits perfect inside the enclosure.

                          Please see the PCB board currently offered by BudIndustries, which can be easily adapted to work like a screw shield for seeeduino platform.

                          Yes, the Seeeduino ScrewShield will be bigger but will provide space…

                          1 vote
                          Vote
                          Sign in
                          Check!
                          (thinking…)
                          Reset
                          or sign in with
                          • facebook
                          • google
                            Password icon
                            Signed in as (Sign out)
                            You have left! (?) (thinking…)
                            Needs More Details  ·  1 comment  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
                          • Sensor board, or arduino shield, based on the AS3935 chip

                            The AS3935 has a very sensitive lightning detector with SPI and I2C interfaces and needs only a few other parts. Putting this chip on a sensor or shield would make it very easy to build an Arduino lightning detector that could count lightning strikes, log them, and warn of a coming lightning storm. Would be great for a weather station project too.

                            5 votes
                            Vote
                            Sign in
                            Check!
                            (thinking…)
                            Reset
                            or sign in with
                            • facebook
                            • google
                              Password icon
                              Signed in as (Sign out)
                              You have left! (?) (thinking…)
                              Under Consideration  ·  4 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
                            • kit to connect notebook LCD lvds type pinout to arduino or raspberry pi and others

                              Kit to connect several lvds LCD types to projects and signal search. To notebooks older, the lcd lvds can be recycled to projects with arduino and raspberry pi or other connections computers's.

                              4 votes
                              Vote
                              Sign in
                              Check!
                              (thinking…)
                              Reset
                              or sign in with
                              • facebook
                              • google
                                Password icon
                                Signed in as (Sign out)
                                You have left! (?) (thinking…)
                                Under Consideration  ·  1 comment  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
                              • Support ODB++ file format

                                It would be very nice if you could handle ODB++ format also.
                                From my point of view, it is very easy to work with. After "I saw the light" with this format (compared to gerber), I prefer not to use gerber.

                                5 votes
                                Vote
                                Sign in
                                Check!
                                (thinking…)
                                Reset
                                or sign in with
                                • facebook
                                • google
                                  Password icon
                                  Signed in as (Sign out)
                                  You have left! (?) (thinking…)
                                  Under Consideration  ·  1 comment  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
                                • 109 votes
                                  Vote
                                  Sign in
                                  Check!
                                  (thinking…)
                                  Reset
                                  or sign in with
                                  • facebook
                                  • google
                                    Password icon
                                    Signed in as (Sign out)
                                    You have left! (?) (thinking…)
                                    Under Consideration  ·  17 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
                                  • Fix the responsive layout on windows

                                    you could tweak your responsive breakpoints.

                                    It's great that the site scales and works on mobile :D

                                    But on windows, the layout hasn't taken into account the fact that scrollbars take up some of the reported available screen width.

                                    With my 1200px wide monitor, this causes an unneccessary horizontal scrollbar.

                                    3 votes
                                    Vote
                                    Sign in
                                    Check!
                                    (thinking…)
                                    Reset
                                    or sign in with
                                    • facebook
                                    • google
                                      Password icon
                                      Signed in as (Sign out)
                                      You have left! (?) (thinking…)
                                      0 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
                                      In Process  ·  Joyce responded

                                      Hi Stian, thanks for your helpful information. We’ve started fixing it.
                                      Thanks again and have a great day.

                                    1 2 3 4 5 6 8 Next →
                                    • Don't see your idea?

                                    My Seeed Idea

                                    Feedback and Knowledge Base