My Seeed Idea

Share. Vote. Discuss. See.

Share your ideas, tell us what you think of other people’s ideas and join the discussion.
Idea Guidelines:
1 – Idea needs to be something we can do. This means, although we appreciate general feedback (for example, “this is good!” or “this hurts!”), here we are looking for ideas we can work on.
2 – Specific. The more details you can provide, the better. Heck—you can attach files to ideas or a reference link to show us what you want!

To get help or support, download, or more information, please visit our wiki site.

  • Hot ideas
  • Top ideas
  • New ideas
  • My feedback
  1. EV3/NXT cable

    It would be fairly easy to connect grove sensors to an EV3 - you would just have to make a custom cable (pretty simple) and add some drivers (I can help there if you want)

    1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
  2. Do a complete worked example of ordering some PCB using Eagle and including V-CUTs

    Show all the steps using some example design right through to ordering
    and show the result.

    8 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
  3. Pay direct via QIWI or Yandex money.

    It will be very simple to pay from Russia!

    4 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    2 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
  4. support question

    Hello Support Team,

    I got a tick tock shield for my daughter, but now I realize we are missing some parts (see below), I would like to add them from german retailers, can you provide me with the specifications?

    Thanks, best regards, Andreas
    au@ulmers.com

    -----
    Thermistor RT1 1
    Light dependent resistor LDR1
    Crystal X1

    the capacitors are described well enough in the soldering guide

    1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
  5. documentatition

    better documents on how o finish the project you ordered. complete documentation .

    0 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
  6. bought two new sensors and no support for GrovePi and RaspberryPi - Voltage Divider POW0516P & Temp/Humidity 101020074 need python software

    Need Python test software for two new sensors, am using GrovePi and RaspberryPi. Iam sure others would like this software both very useful sensors. please update software for new sensors
    Voltage Divider POW0516
    Temp/Humidity 101020074

    1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
  7. more components in Open Parts Library

    more components in Open Parts Library, 555, zeners, comparators, power FETs, voltage references, voltage regulators (78XXX)

    16 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    Needs More Details  ·  6 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
  8. Support KiCad

    I would like to have instructions how to convert my KiCad project the way it can be assembled with your service.

    115 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    10 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
  9. DSO Quad Source code Bundle

    DSO Quad whole firmware newest source code release, it seems the source code in seeed studio wiki is outdated.
    Make a latest full rom source code bundle is appreciated, e.g DFU,LOGO,SYS,APP

    1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
  10. 3 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    2 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
  11. Firefly

    I wish seeedstudio would make a deal with the manufacturers of the Firefly RK-3288 and some other awesome products they are working on. Perhaps this isn't possible, but they do have some really neat things they are doing.

    0 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
    Needs More Details  ·  USB responded

    Hi Aaron:
    Thanks for your advice, we will pay close attention to Firefly RK-3288.But we don’t know the “neat things” they are doing, it will help if you can give us some info about this.

  12. Tutorials

    Tutorials for how to use your shields would be great. Especially configuring other devices that run off of them. Like an X-Bee for example

    0 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    Needs More Details  ·  1 comment  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
  13. create a vacuum / pressure sensor from 30" Hg to 3 atm.

    A vacuum and pressure sensor that is Arduino compatible that can measure from 30" mercury vacuum to approximately 3 atmospheres pressure. It'd be great for those of us using Arduino as engine ECUs to be able to have fine-grained control of engine parameters by knowing intake vacuum or pressure. Knowing the intake cross-sectional volume, the intake vacuum or pressure (in the case of blown engines) could also be used as an intake air flow sensor, which will really be beneficial to those of us using heated water injection to create extra cylinder pressure via steam expansion (to measure if we're…

    3 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
    Needs More Details  ·  USB responded

    Hi DB:
    We think this is a very professional area for the industrial control, would you please give us more advise about the popular sensors in this area, so we can make our products more convenient for you to use.

  14. Screw Shield Board for Industrial DIN Rail Enclosures

    Seeeduino and Linkit can replace and disrupt industrial PLCs industry. Your boards only need a Screw Shield with 5.08mm pitch screws and a screw shield PCB so it can fit in traditional Bud Industries industrial enclosures (those enclosures are very inexpensive).

    So the screw shield should meet Arduino connector specs and also needs the PCB to be sized such way that fits perfect inside the enclosure.

    Please see the PCB board currently offered by BudIndustries, which can be easily adapted to work like a screw shield for seeeduino platform.

    Yes, the Seeeduino ScrewShield will be bigger but will provide space…

    1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    Needs More Details  ·  1 comment  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
  15. Sensor board, or arduino shield, based on the AS3935 chip

    The AS3935 has a very sensitive lightning detector with SPI and I2C interfaces and needs only a few other parts. Putting this chip on a sensor or shield would make it very easy to build an Arduino lightning detector that could count lightning strikes, log them, and warn of a coming lightning storm. Would be great for a weather station project too.

    5 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    Under Consideration  ·  4 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
  16. kit to connect notebook LCD lvds type pinout to arduino or raspberry pi and others

    Kit to connect several lvds LCD types to projects and signal search. To notebooks older, the lcd lvds can be recycled to projects with arduino and raspberry pi or other connections computers's.

    4 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    Under Consideration  ·  1 comment  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
  17. Support ODB++ file format

    It would be very nice if you could handle ODB++ format also.
    From my point of view, it is very easy to work with. After "I saw the light" with this format (compared to gerber), I prefer not to use gerber.

    5 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    Under Consideration  ·  1 comment  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
  18. 109 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    Under Consideration  ·  19 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
  19. Fix the responsive layout on windows

    you could tweak your responsive breakpoints.

    It's great that the site scales and works on mobile :D

    But on windows, the layout hasn't taken into account the fact that scrollbars take up some of the reported available screen width.

    With my 1200px wide monitor, this causes an unneccessary horizontal scrollbar.

    3 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  I wish  ·  Flag idea as inappropriate…  ·  Admin →
    In Process  ·  Joyce responded

    Hi Stian, thanks for your helpful information. We’ve started fixing it.
    Thanks again and have a great day.

1 2 5 6 7 9 Next →
  • Don't see your idea?

My Seeed Idea

Categories

Feedback and Knowledge Base