My Seeed Idea
Share. Vote. Discuss. See.
Share your ideas, tell us what you think of other people’s ideas and join the discussion.
Idea Guidelines:
1 – Idea needs to be something we can do. This means, although we appreciate general feedback (for example, “this is good!” or “this hurts!”), here we are looking for ideas we can work on.
2 – Specific. The more details you can provide, the better. Heck—you can attach files to ideas or a reference link to show us what you want!
To get help or support, download, or more information, please visit our wiki site.
308 results found
-
Fraud?
I suggest you fix your ordering system!
1) I ordered and paid $398,20 USD.
2) You prepared to ship something for $110.58, so I complained that something is missing.
3) You cancelled my order claiming I did not pay (so your accountant says) and suggested to re-order
4) I sent you my paypal transaction of $398,20 USD and your invoice of 110.58 EUR.
5) and I am waiting for a replyObviously I am not willing to reorder and pay twice.
Regards,
Robert
--
Robert Berger
Embedded Software SpecialistReliable Embedded Systems
Consulting Training Engineering
URL: http://www.reliableembeddedsystems.comsubscribe to Linux…
1 vote -
provide Documentation in English for ESP8266 module small and a tutorial on web site.
provide Documentation in English for ESP8266 module small and a tutorial on web site. If you sell it in USA you need to provide English documentation.
2 votes -
Please revise your search form, why do I have to put in the date, give me default. I'm searching "labview" in your store and found nothing!
Please revise your search form, why do I have to put in the date, give me default. I'm searching "labview" in your store and found nothing!
1 vote -
A lot of products with Seeedday coupon are not in stock or discontinued. Very annoying!
A lot of products with Seeedday coupon are not in stock or discontinued. Very annoying!
7 votes -
working link
Please place a link "track this order" which actually works.
6 votes -
Motor Driver Board V1.0
This board needs to be redesigned as it cuts out the RPi when the motors activate. There does not seem to be a solution
1 vote -
Mentor Gerber Format
Complete procedure to get the PCB, Mentor Graphics is the software
1 vote -
Fix your site
fix your site so that you are giving the correct tracking numbers, not fake or tracking number for a previous shipment. I recently purchased a product in october. status is tracable but tracking number is for a shipment in august?!?!? how is this even possible?
1 vote -
Pass the shipping consignment number to the tracking site.
Pass the shipping consignment number to the tracking site.
The order tracking popup is a terrible way to incorporate order tracking: use a proper page or a panel on the base page. I can't select text from the layered panel on my tablet browser.
The track order link doesn't seem to pass the consignment number, which would make sense.
3 votes -
payment method
Better, more reliable payment method.
3 votes -
sell thermoplastic extruders like the WEE KIT from FILABOT.COM for recycling prints from 3D Printers
with the proliferation of thermoplastics like water bottles and "prints" from 3D Printers, why not sell a kit that would allow individuals, schools, and companies that have lots of waste prints to make their own filament material like the KIT EXTRUDER from http://www.filabot.com ?
1 vote -
Add a DTR Pin to the dual mode Bluetooth Device so that it can also flash the microcontroller over the air.
Currently the Bluetooth Modules with HM-13 are not providing the DTR Pin that is needed to reset the microcontroller while flashing a new firmware. It would be great if that functionality could be made available on one of the programmable Output Pins.
1 vote -
Adding LiPo battery support to BeagleBone Green
I suggest adding support for LiPo batteries to the BeagleBone Green.
As far as I can see in this post (http://www.element14.com/community/community/designcenter/single-board-computers/next-gen_beaglebone//blog/2013/08/10/bbb--rechargeable-on-board-battery-system) is just a matter of adding a LiPo battery connector and a resistor
1 vote -
Make the DMX512 PCB board finish flush with the edge of the three pin socket
When trying to mount the DMX512 board I had to cut off 3mm of PCB to allow the socket to sit flush with the mounting hole.
Please finish the PCB flush and put a mount hole on the side instead. Note, I'd put it on the side of the high screw hole to stop socket twisting on insertion of lead. Photos attached
4 votes -
Fix you Stalker V3 Defect
fix your P5 defect on the Stalker V3
1 vote -
Seeeduino 1284P
I would like a Seeeduino 1284P. I really like Seeed's configuration of
the mega better than arduino's, however I feel that the 1284p has
the right amount of I/O and storage with more RAM than the 2560.3 votes -
Single board computer with embedded 3g modem
I just saw the RePhone and the Linkit One, but these are powered by microcontrollers, why not develop a single board computer like the Beaglebone green or Raspberry Pi but with an embedded 3G modem and LiPo battery support
2 votes -
Impedance Calculation Utility
A calculation tool to let customers know the impedance of their PCB traces.
Here is an example:
http://www.hughescircuits.com/index.php/en/support/impedance-calculatorThe customer would only need to enter their PCB trace width, because all the other parameters can be determined automatically from the PCB specifications that the customer has selected.
10 votes -
HS code
you should post an option of "the number of harmonized system code or the number of tarif code" for international purchases.
3 votes -
A decent customer service.
A decent customer service.
2 votes
- Don't see your idea?